What are the installation details of the bathroom facilities? Every detail of the bathroom installation is very important. If it is not installed, there will be many headaches. Let's take a look at the details of the bathroom installation.

Bathroom installation details - toilet installation details

Conventional toilet installations use cement mortar to fill the toilet to the ground. This method has the great drawback that it only knocks off the toilet once the toilet needs to be reinstalled or the pipe is severely blocked. To avoid this, it is more appropriate to use a dry construction method, that is, by installing a nylon wall plug and installing a toilet mounting hole. There are a few things to keep in mind when taking this construction method:

(1) When drilling the mounting hole of the toilet, be sure to drill according to the position shown in the installation diagram to avoid dimensional errors.

(2) The nylon wall bolt should be pre-buried into the ground. It should be avoided because the drilling depth is not enough.

(3) It should be noted that if the ground of the construction is not flat, then the ground should be leveled first, then the bottom of the toilet should be attached to the ground.

Installation details of the bathroom facilities 2 - wash table installation details

If you want to choose "all-body" for washing the countertop, you can't choose the one with only one layer of surface rubber shell, because the surface of the surface rubber shell can not be repaired once it is damaged. (To check whether the table top is "all-body", you can use the light to illuminate from the back at a close distance, and the light-transmitting is the "full body" table). In addition, the joint between the countertop and the washbasin must be filled with a grout to prevent water from seeping out.

Installation details of the bathroom installation three - exhaust fan installation details

The exhaust fan should be noted when installing, because the exhaust fan can help the bathroom to stay away from the moisture, so install the exhaust fan to pay attention to install the reverse gate to prevent the wet and dirty air from flowing backwards.